- Supports HDMI Deep Color & full 3D & 4K2K@30 (HDBaseT technology)
- Extends the transmission up to 60m (198ft) from the HDMI source at Full HD 1080p 48-bit and 35m (114ft) at 4K2K@30
- Supports PoC(Power over Cable) which can power both units from TX or RX side with power supply
- Supports EDID adjustment mechanism for HDMI2.0 at pixel clock higher than 340 MHz
- HDCP & EDID Bypass
- CEC support
- Auto equalization
- Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable transmission
- DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
- Supports full frequency IR signal from 20KHz to 60KHz
- Bi-directional IR path-through
- Full Duplex RS-232 control up to 115,200 bps through connector
- Wall mounting housing design for easy and robust installation
The EX-57VARS Enhanced HDMI Extender over Single Cat.X with HDBaseT-Lite, RS-232, Bi-directional IR & PoC boosts up your video/audio transmission distance to 60m (198ft) in HDTV 1080p with 48-bit color depth. The new generation enhanced technology is to make sure the HDBaseT extender can work properly even though source and display are both compliant with HDMI2.0a and HDCP2.2. EX-57VARS also supports the most advanced 3D video format complaint with HDMI specification and therefore guarantees the highest 3D video compatibility on the market. With only one cost- effective Cat.5/5e/6 cable, users can readily extend HDTV sources from DVD players, Blu-ray Disc player, PS4, PC, and any other kinds of sources compliant with TMDS to distant display monitors including HDMI or DVI enabled TV sets or LCD PC monitors. With the advanced design for the latest HDMI technology, deep color video, DTS-HD or Dolby TrueHD audio, and HDCP supports and compatibility are all further insured. EX-57VARS is also equipped with bi-directional IR pass-through path and RS-232 serial port control. These bonus features allow users to boost RS-232 and IR control distance up to 60m (198ft) through only single Cat.5/5e/6 cable with HDMI signals. In addition, EX-57VARS also supports PoC (Power over Cable) which can power both units from either TX or RX with power supply.
The EX-57VARS includes two units: transmitting unit EX-57VARS-TX and receiving unit EX-57VARS-RX. The transmitting unit is used to capture the input HDMI / DVI signals with IR control packets and carry the signals via one cost effective Cat.5/5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals. EX-57VARS offers the most convenient solution for digital signage with long distance A/V transmission path. With 10G transmission width, EX-57VARS is ready for your next HDMI generation and applications!
-
HDMI Compliance
-
HDCP Compliance
-
DP compliance
-
USB compliance
-
Max. Data Rate
-
Max. Resolution
-
HDR
-
Latency
-
Audio Support
-
CEC control
-
IR Control
-
IR Frequency
-
EDID Selection
-
RS232 Control
-
ESD protection
-
POC
-
B。SDI Output Formats
-
B。HDMI Input Formats
-
B。SDI Speeds Supported
-
B。Video Sampling
-
B。Audio Sampling
-
B。Auto Switching
-
B。Cable Equalization
-
B。Eye-patten Measurements
-
B。Eye-patten Measurements
-
B。RP-198 pathological patterns
-
C。Cable (Belden 1694A) equalization /ransmission
-
C。Fiber Extension
-
D。Control Interface
-
D。Included Accessories
-
Housing Design
-
Casing Style
-
Power Connection
-
Power Supply
-
Power Consumption
-
Operating Humidity
-
Operation temperature
-
Product Weight
-
Package Weight
-
Certifications
- DOCUMENTATION
- User Manual
YOU VIEWED
- SP-5002PZQ
- 1x2 HDMI 2.0a Splitter with Built-in & User Adjustable EDID Management
- EX-57VARS
- Enhanced HDMI Extender over Single Cat.X with HDBaseT-Lite, RS-232, Bi-directional IR & PoC
- SP-4102Z-PT
- 1x2 Mini DisplayPort 1.2 to DisplayPort MST Hub/Splitter with Pigtail Cable
- SW-5005DE
- 5x2 Multi-Format Presentation Switcher with HDMI & HDBaseT-Lite Outputs
- SP-5002P
- 1x2 HDMI Splitter with 4K2K